Pump-intro-page
Important message about our solar submersible well pumps!
 
In our continuous efforts to increase pump longevity and improve the quality of our products for our customers, we have installed a thermal protection sensor in the pump to protect the pump motor from overheating and causing premature failure.
In certain scenarios, some customers may notice the pump shutting off for a brief period of time during normal pumping hours after pumping for a while. The pump will automatically restart after the sensor detects that the pump motor has cooled to a safe operating range. This could be as short as a few minutes or it could take several minutes for the pump to restart depending on the pumping situation.
It is recommended that you monitor the pumping system for a few days and see if it is keeping up with your water demands. When watering livestock it is always best to start with a full tank of water before determining if the system is keeping up with daily demand. Also please keep in mind if you install your system during periods of cloudy weather it may take some extra time to determine if the system is meeting your specific daily water needs.
 
While this sensor may decrease daily production a bit in some situations, it will greatly increase the longevity of your pump. When used in conjunction with our ALC level controller, many months or years of additional pump life can be achieved.
 
solar powered submersible pump
advanced power solar water pump
SR2 Aluminum
Solar Pump.
Part # (535472-2)
 
$ 810.00
(NO additional controller required! )
 
2 Piston brushless motor submersible solar pump.
2 yr. warranty.
 
Over volt protection.
Thermal over load protection to help from overheating and causing damage.
Abrasion & Corrosion resistant.
 
Aluminum Housing and Head.
Reverse polarity protection.
 
Brushless Motor 12-40 volts operating range.
 
Max GPM 3 at no lift or pressure, flows decrease as lift and pressure increase.
 
 
SR4 Aluminum
Solar Pump
Part # (535474-2)
 
$930.00
(NO additional controller required! )
 
4 Piston brushless motor submersible solar pump.
2 yr. warranty
 
Over volt protection.
Thermal over load protection to help from overheating and causing damage.
Abrasion & Corrosion resistant.
 
Aluminum Housing and Head.
Reverse polarity protection.
 
Brushless Motor 12-40 volts operating range.
 
Max GPM 3.75 at no lift or pressure, flows decrease as lift and pressure increase.
 
 
 
 
 
 
Our aluminum solar pumps are a product of 25 years of solar water pump manufacturing experience. We have taken what we have learned over that time, what worked and what didn't, and we have created for our customers our best solar pump ever!
 
These solar submersible well pumps are the latest in solar pump technology, with some of the best features on the market. Such as not requiring the use of an additional controller between the pump and the solar panel to control the voltage or drive the pump motor. This means less expense to you the consumer, and one less component to cause you grief should it fail. Most of our competition requires you purchase additional controls that can cost up to $400 in addition to the pump price.
 
We do "recommend" our ALC advanced level controller, but that is to monitor the water level in your tank and save wear and tear on your pump when the tank is full, it is not required.  When used however, it can add years of life to your pump by causing the pump to shut off when the tank is full and not waste run hours on the pump when water is not needed.
 
 
What's the big deal with aluminum?  Aluminum dissipates heat over 1,000 times better than our old PVC pumps and much better than most other stainless steel housed pumps on the market.
 
Why is this important? It's important because motors and electronic survive better and longer in a cooler environment. The reason our pumps can run dry is because they are in a sealed can that does not allow water in the motor housing, those motors working as they do in that environment cause heat to build up inside the can. Our new aluminum pump housings dissipate that heat at a much higher rate and keep the pump motor working in a friendlier environment for the motor.
 
 
     These SR series aluminum solar pumps come with a 2 yr. warranty.
Factory rebuildable. Designed CNC Aluminum parts. Positive displacement pumps. Lightweight and durable. Temporary run dry capability. Come standard with 100ft. of wire attached so no underwater splice is needed.  (due to our hard coating process actual product appearance or color may vary)
SR4 Solar Pumps require a 5" diameter or larger well casing. Max lift 150ft.
SR2 Solar Pumps require a 4" or larger diameter well casing. Max lift 200ft.
Advanced Power solar pump
    We couldn't be more excited to be offering you one of the finest solar pumps on the market.                                                              
                                                          Meet the Ranch Pump!
 
25 years of solar pump manufacturing experience went into designing this state of the art aluminum housed solar submersible pump, it has one of the strongest and most durable motors on the market. Our unique driver controller makes this pump run extremely efficiently which means you save money on buying solar power, to get the same amount of water our competitors normally need to sell you a lot more solar to get the job done. Since our controller is built into the pump that also means you save on the expense of having to buy an additional power controller as you normally need with other solar pumps of this style. We are so confident and impressed with this Ranch Pump series that we are offering a 5 year warranty. This pump comes with a 3 year standard manufacturer's warranty and an additional 2 year prorated warranty can be achieved if you fill out the registration card and send it in with a copy of your receipt within 30 days of purchase, no additional charge!
RP2 Aluminum Solar Pump.
Part # 535472
 
$ 1010.00
NO additional controller required!
 
2 Piston brushless motor submersible solar pump.
 
Over volt protection.
Thermal over load protection to help from overheating and causing damage.
Abrasion & Corrosion resistant.
 
Pressure relief valve installed to assist in an over pressure situation such as a clogged weep hole or kinked line.
 
Aluminum Housing and Head.
Reverse polarity protection.
 
Brushless Motor 12-40 volts operating range.
 
Max GPM 3 at no lift or pressure, flows decrease as lift and pressure increase.
 
RP4 Aluminum
Solar Pump.
Part # 535474
 
$ 1130.00 
NO additional controller required!
 
4 Piston brushless motor submersible solar pump.
 
Over volt protection.
Thermal over load protection to help from overheating and causing damage.
Abrasion & Corrosion resistant.
 
Pressure relief valve installed to assist in an over pressure situation such as a clogged weep hole or kinked line.
 
Aluminum Housing and Head.
Reverse polarity protection.
 
Brushless Motor 12-40 volts operating range.
 
Max GPM 3.75 at no lift or pressure, flows decrease as lift and pressure increase.
 
   These RP series aluminum solar pumps come with a 3 yr. full and 2 year additional pro-rated warranty.
Factory rebuildable. Designed CNC Aluminum parts. Positive displacement solar pumps. Lightweight and durable. Temporary run dry capability. Come standard with 100ft. of wire attached so no underwater splice is needed. (due to our hard coating process actual product appearance or color may vary)
RP4 Pumps require a 5" diameter or larger well casing. Max lift 150ft.
RP2 Pumps require a 4" or larger diameter well casing. Max lift 200ft.
Keep in mind when we refer to lift we mean static water level. Your pump can be set deeper than max lift if it's in the water. Lift does not begin until you come out of the water. EX: Well 220ft. deep total, but water at 80 feet from the ground. If pump is set at 120ft. pump is still only lifting 80 if that is where water level maintains. Do not submerge pumps greater than 50ft. in the water.
Keep in mind when we refer to lift we mean static water level. Your solar well pump can be set deeper than max lift if it's in the water. Lift does not begin until you come out of the water. EX: Well 220ft. deep total, but water at 80 feet from the ground. If pump is set at 120ft. pump is still only lifting 80 if that is where water level maintains. Do not submerge pumps greater than 50ft. in the water.
Solarpumps.com is a division of apiok.com.
This page was last updated: February 18, 2014
                                                      Advanced Power Inc. 
                     PO Box 1937 or 1520 E. Eagle Rd Weatherford, OK  73096 
                                      Toll Free  866-519-7892  
                      Sales and marketing office: PO Box 548 207 W. Main Canton OK 73724



We are proud that we at Advanced Power Inc. manufacture our pumps in America, providing jobs for Americans! Our people have been at it for over 25 years! Most of our competition can NOT say the same. Many of the competitor's pumps come from China, but are advertised as "assembled" in the USA. 
This page was last updated: February 18, 2014